Flotec Diesel & Petrol service tools Diesel & Petrol service tools

Online Catalogue > Automotive Tools > Diesel & Petrol service tools

10MM BOX END SPARK PLUG WRENCH

Ref: 7111

Plated steel box end wrenches with swivel handle and zinc plated finish. Display packed.
Price: £1.79 (Including VAT at 17.5%)

14MM BOX END SPARK PLUG WRENCH

Ref: 7129

Plated steel box end wrenches with swivel handle and zinc plated finish. Display packed.
Price: £1.96 (Including VAT at 17.5%)

10MM X 300MM LONG REACH SPARK PLUG WRENCH

Ref: 12242

A tubular carbon steel zinc plated wrench 300mm long, designed for use with spark plugs which are deep set into engine blocks. Socket end has rubber insert for spark plug insulator protection and retention. Supplied complete with integral tommy bar. Display packed.
Price: £2.77 (Including VAT at 17.5%)

14MM X 300MM LONG REACH SPARK PLUG WRENCH

Ref: 12243

150MM SPARK PLUG CLEANING BRUSH

Ref: 13157

Compact brush with dense brass fill in wooden stock. Ideal for electrical terminals and spark plug cleaning. Display packed.
Price: £0.98 (Including VAT at 17.5%)

10MM FLEXIBLE SPARK PLUG WRENCH

Ref: 13867

Swivel wrenches with plastic coated T handle. Socket forged steel hardened, tempered and chrome plated with rubber insert for spark plug insulator protection and retention. Display packed.
Price: £2.77 (Including VAT at 17.5%)

14MM FLEXIBLE SPARK PLUG WRENCH

Ref: 13868

DRAPER EXPERT 13MM CRANKED DIESEL INJECTION SPANNER

Ref: 40138

Expert Quality. 13mm bi-hexagon single-ended spanner cranked at 90°. Manufactured from chrome vanadium steel hardened and tempered. Sold loose.
Price: £6.78 (Including VAT at 17.5%)

DRAPER EXPERT 15 PIECE SERPENTINE BELT SERVICE KIT

Ref: 40446

Expert Quality, for the removal and maintenance of polyrib serpentine belts used on engine drive systems. This kit is designed to tackle the restricted working space encountered when in this area of the engine compartment. Kit comprises a tensioner wrench with 25mm female ratchet drive, belt remover/installer plus eight sockets, 3/8" and 1/2" sq. drive adaptors. Display packed in blow mould case.
Price: £36.97 (Including VAT at 17.5%)

DRAPER EXPERT 12 PIECE DIESEL ENGINE COMPRESSION TEST KIT

Ref: 43052

Expert Quality, allows the compression of car and van diesel engines (direct or indirect fuel injection) to be tested by cranking. Large easy-to-read scale measuring 0-1000psi/0-70kg/cm² with 600mm of flexible hose and push on adaptor incorporating a Schrader one way valve. Side pressure relief valve allows rapid retesting. Display packed in blow mould storage case with sleeve.
Price: £126.47 (Including VAT at 17.5%)

DRAPER EXPERT 13 PIECE COMMERCIAL VEHICLE DIESEL ENGINE COMPRESSION TEST KIT

Ref: 43053

Expert Quality, allows the compression of commercial diesel engines (direct or indirect fuel injection) to be tested by cranking. Large easy-to-read scale measuring 0-1000psi/0-70kg/cm² with 600mm of flexible hose and push on adaptor incorporating a Schrader one way valve. Side pressure relief valve allows rapid retesting. Display packed in plastic blow mould storage case with sleeve.
Price: £114.90 (Including VAT at 17.5%)

DRAPER EXPERT UNIVERSAL BELT TENSION TESTER

Ref: 43058

Expert Quality, to adjust the tension on drive belts on various serpentine and camshaft belt thicknesses. Adjustable dual scale graduations readable from front and back of tool. Manufactured from good quality steel with knurled aluminium rotating knob for easy setting. Display packed.
Price: £49.87 (Including VAT at 17.5%)

DRAPER EXPERT COMMON RAIL DIESEL INJECTOR RETURN FLOW KIT

Ref: 43796

Expert Quality, comprehensive kit for performing the simple test to determine excessive return flow from the common rail injectors a common problem with diesel injectors. Can be used whether cranking or running the engine and will measure six cylinders simultaneously. Packed in blow mould case with display sleeve.
Price: £45.81 (Including VAT at 17.5%)

DRAPER EXPERT DIESEL PRIMING PUMP

Ref: 43986

Expert Quality for priming diesel fuel lines, filters and pumps. Comprises hand bulb with one way valve and in-line fuel connectors. Polythene bag with header card.
Price: £14.09 (Including VAT at 17.5%)

ROVER GROUP CAMSHAFT LOCKING TOOL

Ref: 52306

Locks camshaft when changing cam belts etc. For use with Rover Group Metro 1.4 (100 Series) GTa, GTi May 1990 on; Rover 214 16 valve Si, SLi, GSi Oct. 1989 on; Rover 414 16 valve Si, SLi, GSi March 1990 on. Manufactured from anodized aluminium. Display packed.
Price: £1.99 (Including VAT at 17.5%)

DRAPER EXPERT 7 PIECE FORD DIESEL ENGINE INJECTION TIMING KIT

Ref: 52576

Expert Quality, for use on Ford 1.6 and 1.8 diesel injection engines. Kit is manufactured from mild steel and chemically blacked. Display packed in handy plastic case.
Price: £11.59 (Including VAT at 17.5%)

DRAPER EXPERT GM (VAUXHALL/OPEL) VALVE CAMSHAFT LOCKING TOOL

Ref: 52578

Expert Quality, allows camshaft alignment to be set without altering TDC position. For use on mark I/II 1.6 and 1.7 OHC diesel engines fitted to GM (Vauxhall/Opel) Corsa (Nova), Astra/Belmont (Kadett) and Vectra (Cavalier). Display packed.
Price: £9.67 (Including VAT at 17.5%)

SPARK PLUG BOOT PLIERS

Ref: 54504

Heavy duty pattern, designed to remove spark plug boots without pulling the plug lead from its clip. Angled nose gives easier access to plug boot. Display packed.
Price: £7.47 (Including VAT at 17.5%)

13 PIECE DIESEL AND PETROL ENGINE TIMING KIT

Ref: 57629

For use on Audi, Citroën, Peugeot, Volkswagen and Volvo petrol and diesel engined cars and light commercial vehicles. Manufactured from mild steel with plated finish. Display packed in blow mould storage case.
Price: £12.93 (Including VAT at 17.5%)

CAM SHAFT SETTING & LOCKING KIT

Ref: 61262

For setting the camshaft on the following: Ford 1.6, 1.8 and 2.0 twin cam 16 valve petrol Zetec SE engines; Ford Fiesta and Puma 1.25, 1.4 Zetec SE (1995 onwards) engines and Mazda 121 and 1.25 models. Comprises setting and locking plate and camshaft TDC location pin. Display packed.
Price: £4.22 (Including VAT at 17.5%)

TWIN CAM LOCKING TOOL FOR GM OR VAUXHALL ECOTECH ENGINES

Ref: 61276

For locking twin camshafts on GM (Vauxhall/Opel) Ecotec 1.8, 2.0 and 2.2L 16 valve engines fitted to Astra, Cavalier, Calibra, Vectra, Omega, Sintra and Frontera models. Manufactured from tough nylon. Display packed.
Price: £3.09 (Including VAT at 17.5%)

CAMSHAFT LOCKING TOOL FOR GM (VAUXHALL/OPEL) ECOTEC ENGINES

Ref: 61277

For locking single camshafts on GM (Vauxhall/Opel) Ecotec 1.4 and 1.6L 16 valve petrol engines fitted to Astra, Corsa, Tigra and Vectra models when replacing components. Manufactured from tough nylon. Display packed.
Price: £3.15 (Including VAT at 17.5%)

DRAPER EXPERT CAM SHAFT HOLDING & ALIGNMENT TOOL FOR FORD MONDEO ZETA & ZETEC ENGINES

Ref: 63397

Expert Quality, suitable for use on Ford Zeta and Zetec engines. The holding tool is designed to hold and manipulate the cam drive pulley. The aligning tool is used in conjunction with the holder to align the two camshafts with each other. The pulley holder fits positively into the camshaft spokes enabling it to move accurately for alignment and tension, holding it later for bolt tightening. Display carton.
Price: £12.53 (Including VAT at 17.5%)

DRAPER EXPERT FORD DIESEL ENGINE CAMSHAFT SETTING & LOCKING PLATE

Ref: 66237

Expert Quality, for use on 1.8 diesel engines fitted in Fiesta 1.8D, Escort 1.8D/1.8TD and Mondeo 1.8TD vehicles. Anodized finish for corrosion protection. Display packed.
Price: £4.64 (Including VAT at 17.5%)

DRAPER EXPERT GM (VAUXHALL/OPEL) DIESEL ENGINE SETTING & LOCKING PLATE

Ref: 66238

Expert Quality, for flywheel and crankshaft TDC setting. For use on X17DTL 1.7 diesel engines. Kit comprises TDC plate and locking pins. Anodized finish for corrosion protection. Display packed.
Price: £14.69 (Including VAT at 17.5%)

DRAPER EXPERT CAMSHAFT LOCKING TOOL GM 1.4 1.6L 1.8 16V ECOTEC ENGINES

Ref: 69928

Expert Quality, for locking single and twin camshafts on GM (Vauxhall/Opel) Ecotec 1.4, 1.6L and 1.8 16 valve petrol engines. Manufactured from anodized aluminium. Display packed
Price: £10.43 (Including VAT at 17.5%)

DRAPER EXPERT CAMSHAFT LOCKING TOOL FOR GM 1.8 & 2.0L 16V ECOTEC ENGINES

Ref: 69929

Expert Quality, for locking single camshafts on GM (Vauxhall/Opel) Ecotec 1.8 and 2.0L 16 valve petrol engines. Manufactured from anodized aluminium. Display packed.
Price: £10.43 (Including VAT at 17.5%)

DRAPER EXPERT CAMSHAFT LOCKING TOOL GM (VAUXHALL/OPEL) & SAAB ENGINES

Ref: 69934

Expert Quality, for locking single camshafts on GM (Vauxhall/Opel) and Isuzu vehicles as below. Manufactured from anodized aluminium. Display packed.
Price: £10.43 (Including VAT at 17.5%)

DRAPER EXPERT CAMSHAFT LOCKING TOOL GM (VAUXHALL/OPEL) & SAAB ENGINES

Ref: 69935

Expert Quality, for locking single camshafts on GM (Vauxhall/Opel) Cavalier/Calibra 2.5L, Vectra 2.5L, Omega 2.5 and 3.0L, Frontera/Sintra 3.0L, Saab 900 2.5L, and 9000 3.0L V6 petrol engines. Manufactured from anodized aluminium. Display packed.
Price: £10.43 (Including VAT at 17.5%)

DRAPER EXPERT EXP QUALITY FLYWHEEL HOLDING TOOL GM VEHICLES

Ref: 71173

Expert Quality, for holding flywheels on the GM (Vauxhall/Opel) and Isuzu vehicles as below. Display packed.
Price: £2.59 (Including VAT at 17.5%)

DRAPER EXPERT EXP QUALITY FLYWHEEL HOLDING TOOL

Ref: 71174

Expert Quality, for holding flywheels on popular Citroën, Fiat, FSO, LDV and Peugeot vehicles. Display packed.
Price: £7.34 (Including VAT at 17.5%)

DRAPER EXPERT 8 PCE CAMSHAFT/FLYWHEEL LOCKING/HOLDING KIT

Ref: 71189

Expert Quality, comprehensive kit for locking or holding camshafts and flywheels on many GM (Vauxhall/Opel), Isuzu, Rover, Citroën, Peugeot, Saab and Volkswagen petrol and diesel vehicles. Packed in blow mould carrying case and display sleeve.
Price: £61.08 (Including VAT at 17.5%)

DRAPER EXPERT VOLKSWAGEN DIESEL ENGINE CAMSHAFT LOCKING TOOLL

Ref: 71204

Expert Quality, for locking crankshafts on Lupo 3L 1.2TDI, Lupo 1.4TDI, Polo 1.4TDI, Golf 1.9TDI, Bora 1.9TDI and Passat 1.9TDI. diesel engines. Display packed
Price: £8.25 (Including VAT at 17.5%)

Online Catalogue > Automotive Tools > Diesel & Petrol service tools


	DIY Tools and Professional Power Tools Catalogue