Flotec Draper Value Draper Value

Online Catalogue > Draper Value > Draper Value

DRAPER VALUE SCREWDRIVER & WIRE STRIPPER

Ref: 13697

Draper Value, plain slot screwdriver incorporating a wire stripping facility in handle. Display packed.
Price: £0.65 (Including VAT at 17.5%)

DRAPER VALUE 150MM COMBINATION PLIERS

Ref: 13813

Draper Value, forged from carbon steel, hardened and tempered. The jaws and cutting edges are induction hardened with bright polished finish. Cushion-grip handles. Display packed.
Price: £2.74 (Including VAT at 17.5%)

DRAPER VALUE 150MM LONG NOSE PLIERS

Ref: 13817

DRAPER VALUE 160MM DIAGONAL SIDE CUTTERS

Ref: 13819

Draper Value, forged from carbon steel, hardened and tempered. The cutting edges are induction hardened with bright polished finish. Cushion-grip handles. Display packed.
Price: £2.74 (Including VAT at 17.5%)

DRAPER VALUE 450G HARDWOOD SHAFT CLAW HAMMER

Ref: 13905

Draper Value, forged fine grain polished steel head, hardened and tempered with hardwood shaft. Sold loose.
Price: £4.09 (Including VAT at 17.5%)

DRAPER VALUE 6 PIECE JEWELLERS SCREWDRIVER SET

Ref: 13997

Draper Value, hardened tool steel precision ground blades with coloured plastic handles with swivel tops. Display packed in plastic case.
Price: £1.95 (Including VAT at 17.5%)

DRAPER VALUE RETRACTABLE TRIMMING KNIFE

Ref: 14070

Draper Value, with plastic handle and snap-off retractable blade. Display packed.
Price: £0.59 (Including VAT at 17.5%)

DRAPER VALUE RETRACTABLE TRIMMING KNIFE

Ref: 14071

Draper Value, with plastic handle and snap-off retractable blade. Display packed.
Price: £0.71 (Including VAT at 17.5%)

DRAPER VALUE 150MM ANVIL PATTERN FLOWER SHEAR

Ref: 14133

Draper Value, stainless steel blade with impact resistant plastic handles, locking catch and wrist strap. Display packed.
Price: £1.83 (Including VAT at 17.5%)

DRAPER VALUE 300MM HANDY SAW

Ref: 14183

Draper Value, plastic grip handle supplied complete with carbon steel hacksaw blade. The saw takes conventional hacksaw blades or broken blades the length of which can be varied by sliding the blade through the handle. Display packed.
Price: £2.31 (Including VAT at 17.5%)

DRAPER VALUE 4 WAY CRIMPING TOOL KIT

Ref: 18071

Draper Value, carbon steel, hardened, tempered and chemically blacked. Moulded grip handles. Display packed.
Price: £3.87 (Including VAT at 17.5%)

DRAPER VALUE 22 PIECE MAGNETIC T BAR SCREWDRIVER BIT & SOCKET SET

Ref: 18925

Draper Value, 'T' handled driver with chrome plated blade and 1/4" magnetic bit holding facility. Display packed.
Price: £5.84 (Including VAT at 17.5%)

DRAPER VALUE 150MM CRESCENT TYPE ADJUSTABLE WRENCH

Ref: 19479

Draper Value, crescent type wrenches forged from carbon steel, hardened, tempered and chrome plated with polished jaws. Display packed.
Price: £3.17 (Including VAT at 17.5%)

DRAPER VALUE 200MM CRESCENT TYPE ADJUSTABLE WRENCH

Ref: 19480

Draper Value, crescent type wrenches forged from carbon steel, hardened, tempered and chrome plated with polished jaws. Display packed.
Price: £4.10 (Including VAT at 17.5%)

DRAPER VALUE 250MM CRESCENT TYPE ADJUSTABLE WRENCH

Ref: 19481

Draper Value, crescent type wrenches forged from carbon steel, hardened, tempered and chrome plated with polished jaws. Display packed.
Price: £4.52 (Including VAT at 17.5%)

DRAPER VALUE 225MM CURVED JAW SELF GRIP PLIERS

Ref: 19483

Draper Value, manufactured from carbon steel and nickel plated for corrosion protection. Serrated gripping jaws, adjustable opening with quick release lever. Display packed.
Price: £3.47 (Including VAT at 17.5%)

DRAPER VALUE 500MM HANDSAW

Ref: 19485

Draper Value, general purpose handsaw with moulded plastic handle. Handle incorporates a 45° and 90° angle feature. Display packed.
Price: £3.33 (Including VAT at 17.5%)

DRAPER VALUE CARPENTERS BALL & CLAW PINCERS

Ref: 19486

Draper Value, forged from carbon steel, hardened and tempered with induction hardened jaws. Ball and claw pattern handles with black painted finish. Display packed.
Price: £2.19 (Including VAT at 17.5%)

DRAPER VALUE 3 PIECE SET OF PLIERS

Ref: 19495

DRAPER VALUE 2 PIECE RETRACTABLE KNIFE SET

Ref: 19496

Draper Value, comprising Retractable Knives Stock Nos.14070 and 14071. Display packed.
Price: £1.27 (Including VAT at 17.5%)

DRAPER VALUE 110G CROSS PEIN HAMMER

Ref: 19516

Draper Value, forged black painted head, hardened and tempered with polished faces and hardwood shaft. Sold loose.
Price: £3.33 (Including VAT at 17.5%)

DRAPER VALUE 225G WARRINGTON HAMMER

Ref: 19569

Draper Value, forged black painted head, hardened and tempered with polished faces and hardwood shaft. Sold loose.
Price: £3.78 (Including VAT at 17.5%)

DRAPER VALUE 300MM CRESCENT TYPE ADJUSTABLE WRENCH

Ref: 19685

Draper Value, crescent type wrenches forged from carbon steel, hardened, tempered and chrome plated with polished jaws. Display packed.
Price: £6.33 (Including VAT at 17.5%)

DRAPER VALUE 1KG CLUB HAMMER

Ref: 19780

Draper Value, forged hardened and tempered head with polished faces and hardwood shaft. Sold loose.
Price: £5.43 (Including VAT at 17.5%)

DRAPER VALUE 125MM WIRE STRIPPER

Ref: 19783

Draper Value, general duty wire stripper, spring-loaded with locking catch. Capacity 0.5-6.0mm². Display packed.
Price: £2.20 (Including VAT at 17.5%)

DRAPER VALUE 20MM EXTRUDED BRASS CYLINDER PADLOCK

Ref: 21581

Draper Value, general purpose padlock with steel shackle, brass body and cylinder. Supplied complete with three keys. Display packed.
Price: £2.16 (Including VAT at 17.5%)

DRAPER VALUE 15 PIECE 1/2" SQUARE DRIVE METRIC SOCKET SET

Ref: 26835

Draper Value, manufactured from carbon steel, hardened, tempered and chrome plated for corrosion protection. Packed in blow mould carrying case.
Price: £12.53 (Including VAT at 17.5%)

DRAPER VALUE WINDOW SCRAPER

Ref: 29407

Draper Value, moulded plastic with heavy duty Sheffield steel blade and blade guard. Spare blades are available - see entry. Display packed.
Price: £0.66 (Including VAT at 17.5%)

DRAPER VALUE RETRACTABLE TRIMMING KNIFE

Ref: 29412

Draper Value, plastic body with reversible retractable Sheffield steel blade. Display packed.
Price: £0.66 (Including VAT at 17.5%)

VALUE HACKSAW FRAME(250-300MM)

Ref: 31072

Price: £4.61 (Including VAT at 17.5%)

DRAPER VALUE 450G CLAW HAMMER

Ref: 31392

Draper Value, fine grain carbon steel, black painted head, hardened and tempered with polished striking face. Hardened tubular steel shaft with rubber grip. Sold loose.
Price: £4.94 (Including VAT at 17.5%)

DRAPER VALUE 100MM CRESCENT TYPE ADJUSTABLE WRENCH

Ref: 31881

Draper Value, crescent type wrenches forged from carbon steel, hardened, tempered and chrome plated with polished jaws. Display packed.
Price: £2.70 (Including VAT at 17.5%)

DRAPER VALUE 225G HARDWOOD SHAFT CLAW HAMMER

Ref: 31978

Draper Value, forged fine grain polished steel head, hardened and tempered with hardwood shaft. Sold loose.
Price: £3.33 (Including VAT at 17.5%)

DRAPER VALUE 25 PIECE 1/2" Sq. Dr. MM/AF COMBINED SOCKET SET

Ref: 36913

Draper Value, manufactured from carbon steel, hardened, tempered and chrome plated for corrosion protection. Packed in blow mould carrying case.
Price: £16.70 (Including VAT at 17.5%)

DRAPER VALUE 42 PIECE 1/2" SQUARE DRIVE COMBINED SOCKET SET

Ref: 36914

Draper Value, manufactured from carbon steel, hardened, tempered and chrome plated for corrosion protection. Packed in blow mould carrying case.
Price: £30.94 (Including VAT at 17.5%)

DRAPER VALUE 220G CLAW HAMMER

Ref: 37178

DRAPER VALUE 560G CLAW HAMMER

Ref: 37179

DRAPER VALUE 280MM BRICK TROWEL

Ref: 39528

Draper Value, narrow heel trowel with hardened, tempered and lacquered carbon steel blade. Polished hardwood handle. Display packed.
Price: £3.51 (Including VAT at 17.5%)

DRAPER VALUE 3M/1OFT MEASURING TAPE

Ref: 40079

Draper Value, tough plastic case with belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16 and 1/32, with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Display packed.
Price: £1.28 (Including VAT at 17.5%)

DRAPER VALUE 5M/16FT MEASURING TAPE

Ref: 40080

DRAPER VALUE 7.5M/25FT MEASURING TAPE

Ref: 40081

DRAPER VALUE 3M/10FT SOFT GRIP MEASURING TAPE

Ref: 40082

Draper Value, tough plastic case with soft grip, belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16" and 1/32", with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Display packed.
Price: £1.60 (Including VAT at 17.5%)

DRAPER VALUE 5M/16FT SOFT GRIP MEASURING TAPE

Ref: 40083

DRAPER VALUE 7.5M/25FT SOFT GRIP MEASURING TAPE

Ref: 40085

DRAPER VALUE 24 x 5M/16FT MEASURING TAPES

Ref: 40086

Draper Value, tough plastic case with belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16 and 1/32, with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Supplied in countertop display. Multiples of 24 tapes (3M/10ft) or 12 tapes (7.5M/25ft) only, supplied in countertop displays. Carton packed.
Price: £1.95 (Including VAT at 17.5%)

DRAPER VALUE 12 x 7.5M/25FT MEASURING TAPES

Ref: 40087

Draper Value, tough plastic case with belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16 and 1/32, with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Supplied in countertop display. Multiples of 24 tapes (3M/10ft) or 12 tapes (7.5M/25ft) only, supplied in countertop displays. Carton packed.
Price: £3.09 (Including VAT at 17.5%)

DRAPER VALUE 24 x 5M/16FT SOFT GRIP TAPES

Ref: 40089

Draper Value, tough plastic case with soft grip, belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16 and 1/32, with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Supplied in countertop display. Multiples of 24 tapes (3M/10ft) or 12 tapes (7.5M/25ft) only, supplied in countertop displays. Carton packed.
Price: £2.26 (Including VAT at 17.5%)

DRAPER VALUE 12 x 7.5M/25FT SOFT GRIP TAPES

Ref: 40090

Draper Value, tough plastic case with soft grip, belt clip and locking button. Power return blade has clear black and red graduations, metres into cm/mm and feet into inches, 1/8", 1/16 and 1/32, with wear resistant coating. Stud centre markings every 16". Self-aligning end hook for accurate internal/external measurements. Supplied in countertop display. Multiples of 24 tapes (3M/10ft) or 12 tapes (7.5M/25ft) only, supplied in countertop displays. Carton packed.
Price: £3.40 (Including VAT at 17.5%)

DRAPER VALUE DOUBLE TOOL POUCH

Ref: 40112

Draper Value, polyester comprising 16 assorted size pockets, two chromed hammer loops, tape measure holder, mobile phone holder and fully adjustable 50mm wide belt with 'quick release' buckle. Packed in polythene bag with display card.
Price: £7.46 (Including VAT at 17.5%)

DRAPER VALUE TOOL AND NAIL POUCH

Ref: 40113

Draper Value, polyester comprising four pockets, two hammer loops and belt loop suitable for belts up to 75mm wide. Packed in polythene bag with display card.
Price: £3.31 (Including VAT at 17.5%)

DRAPER VALUE 45 PIECE 1/4" SQUARE DRIVE SOCKET SET

Ref: 40408

Draper Value, manufactured from carbon steel, hardened, tempered and chrome plated for corrosion protection. Packed in blow mould carrying case.
Contents
Price: £9.54 (Including VAT at 17.5%)

DRAPER VALUE 18 PIECE COMBINATION DRILL SET

Ref: 40856

Combination set comprising six high speed steel straight shank twist drills, six masonry and six wood boring bits. Packed in twist top stage drum. Multiples of 12 drill sets only, supplied in countertop display.
Price: £4.50 (Including VAT at 17.5%)

DRAPER VALUE 203 x 203MM ABS PLASTERERS HAWK

Ref: 40939

Draper Value, lightweight hawk manufactured from rigid ABS with detachable handle and callous protector. Display packed.
Price: £4.52 (Including VAT at 17.5%)

DRAPER VALUE 33 PIECE BIT SET

Ref: 42282

Draper Value, bit set and holder comprising a selection of 1/4" insert bit types generally available on the market. The insert bits (25mm long) are manufactured from chrome vanadium steel steel hardened, tempered with a shot blasted finish. Display packed in a handy plastic storage case.
Price: £5.16 (Including VAT at 17.5%)

DRAPER VALUE 225MM CAULKING GUN

Ref: 43849

Draper Value, steel skeleton frame, handle with plunger and release clip. Sold loose.
Price: £2.09 (Including VAT at 17.5%)

DRAPER VALUE STAPLE GUN/TACKER

Ref: 44036

Draper Value, plastic bodied with removable plastic anvil and metal handle with handle clip. The anvil is easily removed to convert to a staple gun. Uses staples size 6-8mm with a 12mm crown. Supplied complete with one strip of 100 x 6mm staples. Display packed.
Price: £4.22 (Including VAT at 17.5%)

DRAPER VALUE 300mm HACKSAW FRAME

Ref: 44158

Draper Value, general purpose with an adjustable round steel tube bow frame for 250mm and 300mm blades. Zinc cast aluminium handle. Supplied complete with a 250mm blade. Multiples of 12 hacksaws only, supplied in countertop display.
Price: £4.50 (Including VAT at 17.5%)

DRAPER VALUE 150MM BENCH VICE

Ref: 45239

Draper Value, cast iron body with steel screw and handle. Has useful anvil 74 x 55mm. Carton packed.
Price: £37.46 (Including VAT at 17.5%)

SMOOTHING PLANE NO.4

Ref: 45244

Price: £9.86 (Including VAT at 17.5%)

DRAPER VALUE 160mm BYPASS PATTERN SECATEURS

Ref: 45309

Draper Value, with stainless steel blades, impact-resistant anti-grip plastic handles with locking catch. Display packed.


	DIY Tools and Professional Power Tools Catalogue