Flotec General engine service tools General engine service tools

Online Catalogue > Automotive Tools > General engine service tools

18 BLADE METRIC & IMPERIAL FEELER GAUGE SET

Ref: 10094

Combination gauge with eight metric and ten imperial 75mm long blades hardened and polished for long accurate life. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Display packed.
Price: £2.91 (Including VAT at 17.5%)

610MM FULLY FLEXIBLE MAGNETIC PICK UP TOOL

Ref: 10195

Fully flexible plated stem with plastic grip and powerful magnetic end. Display packed.
Price: £1.55 (Including VAT at 17.5%)

FIXED SHAFT INSPECTION MIRROR

Ref: 10263

Fully flexible head with mirror 55mm diameter to give good visibility in concealed areas. Plated finish with plastic grip. Display packed.
Price: £4.30 (Including VAT at 17.5%)

DRAPER EXPERT 26 BLADE IMPERIAL FEELER GAUGE SET

Ref: 10286

Expert Quality, 100mm long taper blades, hardened and polished for long accurate life. Each blade is marked with its size and folds into a polished steel case with thumbscrew. Display packed.
Price: £6.00 (Including VAT at 17.5%)

240MM DOUBLE ENDED VALVE GRINDING STICK

Ref: 10409

Recycled PVC shaft with 19mm and 22mm diameter rubber suction ends. Display packed.
Price: £0.73 (Including VAT at 17.5%)

9MM - 12MM CAPACITY NUT SPLITTER

Ref: 10913

For the safe removal of corroded or damaged nuts without damaging bolt threads. Forged medium carbon steel frame with enclosed head and chrome plated finish. Threaded splitting pin with ground cutter manufactured from chrome molybdenum steel, hardened and tempered. Display packed.
Price: £3.74 (Including VAT at 17.5%)

12MM - 16MM CAPACITY NUT SPLITTER

Ref: 10915

16MM - 22MM CAPACITY NUT SPLITTER

Ref: 10916

FLEXIBLE SHAFT INSPECTION MIRROR

Ref: 11954

Fully flexible shaft and fixed head with mirror 55mm diameter to give good visibility in concealed areas. Plated finish with plastic grip. Display packed.
Price: £4.72 (Including VAT at 17.5%)

DRAPER EXPERT 75MM - 175MM CAPACITY VALVE SPRING COMPRESSOR

Ref: 13890

Expert Quality, with plastic coated locking handle to keep valve springs positively compressed during work. Manufactured from selected steel and zinc plated. Display packed.
Price: £18.81 (Including VAT at 17.5%)

DRAPER EXPERT 60MM - 150MM CAPACITY VALVE SPRING COMPRESSOR

Ref: 13892

12 BLADE METRIC & IMPERIAL ANGLED TAPPET GAUGE

Ref: 19577

Combination gauge for the setting of valve tappets on motorcycles, mowers, cars, vans, etc. The dual marked blades are 95mm long and offset to give improved access to the engine and are hardened and polished for long accurate life. Each blade is marked with its size and folds into a polished steel case with thumbscrew. Display packed.
Price: £4.21 (Including VAT at 17.5%)

DRAPER EXPERT 32 BLADE DUAL READING COMBINATION FEELER GAUGE

Ref: 19613

Expert Quality, one piece combination gauge with 32 dual marked blades 95mm long, hardened for long accurate life. Each blade is marked with its size and folds into a polished steel case with thumbscrew. Display packed.
Price: £10.22 (Including VAT at 17.5%)

DRAPER EXPERT 40 PIECE TX STAR HEXAGON & XZN MECHANICS BIT SET

Ref: 21932

Expert Quality, insert bits manufactured from silicon steel, hardened and tempered with shot blasted finish. Bit holders made from chrome vanadium steel hardened, tempered and chrome plated. Packed in steel case and display carton.
Price: £23.19 (Including VAT at 17.5%)

DRAPER EXPERT 55MM - 175MM CAPACITY UNIVERSAL VALVE SPRING COMPRESSOR

Ref: 26967

Expert Quality, plastic coated locking handles to keep valve springs positively compressed during work. For use on multi-valve and diesel engines with deep seated valves and on many OHC/OHV petrol/diesel engines. Unique dual cam action provides choice of operation either above or below valve. Display packed.
Price: £39.57 (Including VAT at 17.5%)

90MM - 420MM TELESCOPIC MAGNETIC PICK UP TOOL

Ref: 33080

A fully extendable pick up tool with magnetic end. Ideal for the retrieval of nuts, screws and objects lost in remote places. Display packed.
Price: £3.06 (Including VAT at 17.5%)

90MM IGNITION FILE WITH SPARK PLUG GAUGES

Ref: 33554

File with points and spark plug gauges fitted with thicknesses of 0.381mm (0.015") and 0.625mm (0.025") respectively. Display packed.
Price: £1.40 (Including VAT at 17.5%)

DRAPER EXPERT VALVE PLAY COMPENSATOR & ROCKER ARM REMOVER FOR GM OHC ENGINES

Ref: 33607

Expert Quality, allows easy removal of the rocker arm and valve play compensator (hydraulic tappets) on GM (Vauxhall/Opel) OHC engines without the need to remove the camshaft. Display packed.
Price: £10.13 (Including VAT at 17.5%)

DRAPER EXPERT 35 PIECE TX STAR & HEXAGON MECHANICS BIT SET

Ref: 33614

Expert Quality, insert bits manufactured from good quality steels, hardened and tempered with chemically blacked finish. Bit holders made from chrome vanadium steel hardened, tempered and chrome plated. Packed in steel case and display carton.
Price: £27.77 (Including VAT at 17.5%)

4 PIECE MINI HOOK AND PICK SET

Ref: 35099

Designed to ease the removal of ‘OÕ rings, cotter pins, seals and bushes in various automotive and engineering applications. Blades stainless steel hardened and tempered with impact - resistant handles. Display packed.
Price: £5.38 (Including VAT at 17.5%)

5 PIECE SCRAPER AND REMOVER SET

Ref: 35100

Suitable for a variety of applications including removing cotter pins, radiator hoses, flaking paint and gaskets. Blades hardened and tempered carbon steel. Display packed.
Price: £13.16 (Including VAT at 17.5%)

MAGNETIC PARTS BOWL

Ref: 35384

For storage of nuts, bolts, screws, etc. whilst working. Bowl has rubber covered magnetic base for affixing to metal objects such as vehicle bodywork, tool boxes etc. Magnetism transfers to inner surface of bowl to retain small metal parts, nuts, bolts, etc. Sold loose.
Price: £4.52 (Including VAT at 17.5%)

4 PIECE PRY BAR SET

Ref: 35396

Chemically blacked finish blades with PVC handles. Display packed.
Price: £12.07 (Including VAT at 17.5%)

GASKET SCRAPER

Ref: 36923

Manufactured from carbon steel hardened, tempered and satin chrome finish with shot blast scraper end. For cleaning cylinder heads, removing old sealants and carbon, etc. Display packed.
Price: £3.65 (Including VAT at 17.5%)

UNIVERSAL O RING AND SEAL PULLER

Ref: 37439

Universal seal puller for use on rubber ‘OÕ rings, oil and grease seals. Particularly useful on commercial vehicle applications. Display packed.
Price: £3.71 (Including VAT at 17.5%)

610MM FULLY FLEXIBLE CLAW ACTION PICK UP TOOL

Ref: 39669

Fully flexible plated stem with claw action pick-up end, controlled from spring-loaded grip. Display packed.
Price: £2.07 (Including VAT at 17.5%)

DRAPER EXPERT EXHAUST PIPE CUTTER

Ref: 40100

Expert Quality, for cutting thin walled exhaust pipes 35-64mm diameter, up to 3mm thickness. The complete cut can be made in just a quarter of a turn making this tool ideal for working in confined spaces under vehicles. Display packed.
Price: £19.60 (Including VAT at 17.5%)

DRAPER EXPERT 700-1100MM 5KG TELESCOPIC MAGNETIC PICK UP TOOL AND SWEEP

Ref: 40144

Expert Quality, extendable handle with twistlock action and three-position head size 300 x 50mm. Will pick up maximum weight of 5kg. Display packed.
Price: £18.85 (Including VAT at 17.5%)

DRAPER EXPERT 80-120MM FUEL SENDER SPANNER

Ref: 43843

Expert Quality, for the removal and replacement of the retaining ring on fuel tank sender units. 25mm drive bolt with 55mm long arms. Manufactured from quality steel. Display packed.
Price: £9.86 (Including VAT at 17.5%)

DRAPER EXPERT 110-170MM FUEL SENDER SPANNER

Ref: 43844

DRAPER EXPERT 75-160MM FUEL SENDER SPANNER

Ref: 43845

45MM - 75MM PISTON RING COMPRESSOR

Ref: 51844

Spring steel with steel adjusting key. Display packed.
Price: £6.02 (Including VAT at 17.5%)

60MM - 100MM PISTON RING COMPRESSOR

Ref: 51845

Spring steel with steel adjusting key. Display packed.
Price: £7.92 (Including VAT at 17.5%)

75MM - 140MM PISTON RING COMPRESSOR

Ref: 51846

Spring steel with steel adjusting key. Display packed.
Price: £9.54 (Including VAT at 17.5%)

70MM - 150MM PISTON RING COMPRESSOR

Ref: 51847

Spring steel with steel adjusting key. Display packed.
Price: £9.92 (Including VAT at 17.5%)

DRAPER EXPERT 560MM FLEXIBLE MAGNETIC PICK UP TOOL

Ref: 52305

Expert Quality, chrome plated flexible shaft with plastic handle and removable protective cap over magnet. Display packed.
Price: £6.67 (Including VAT at 17.5%)

DUAL READING LONG BLADE COMBINATION FEELER GAUGE

Ref: 52339

One piece combination gauge with 26 dual marked blades 150mm long, hardened for long accurate life. Each blade is marked with its size and folds into a case with thumbscrew. This gauge is particularly useful for use on agricultural and heavy commercial engines.
Price: £5.84 (Including VAT at 17.5%)

MECHANICS STETHOSCOPE

Ref: 54503

Suitable for detecting faults in engines, bearings and other moving parts. Supplied complete with two probes 290mm long. Display packed.
Price: £8.20 (Including VAT at 17.5%)

9MM - 22MM CAPACITY 3 PIECE NUT SPLITTER SET

Ref: 55108

For the safe removal of corroded or damaged nuts without damaging bolt threads. Drop forged steel body hardened and tempered with plated finish. Threaded splitting pin manufactured from chrome molybdenum steel hardened and tempered with chemically blacked finish. Capacities: 9 - 12mm, 12 - 16mm and 16 - 22mm. Display packed.
Price: £12.42 (Including VAT at 17.5%)

25MM - 57MM CYLINDER HONE

Ref: 56244

For use on small bore cylinders i.e. motor cycles etc. with capacities between 25 and 57mm. The flexible drive shaft allows easy alignment whilst working, with the honing pressure adjustable to suit the particular application. Suitable for use with an electric or air drill, the maximum working speed is 2400rpm. Overall length 210mm. Supplied complete with 220 grit stone set, which are also available separately - Stock No. 56247. Display packed.
Price: £5.79 (Including VAT at 17.5%)

51MM - 177MM CYLINDER HONE

Ref: 56246

For use on cylinders with capacities between 51 and 177mm i.e cars, vans, trucks, marine and industrial applications. The flexible drive shaft allows easy alignment whilst working, with the honing pressure adjustable to suit the particular application. Suitable for use with an electric or air drill, the maximum working speed is 2400rpm. Supplied complete with 180 grit stone set, which is also available separately as are other grades. Overall length 300mm. Display packed.
Price: £16.27 (Including VAT at 17.5%)

25MM - 57MM CYLINDER HONE 220 GRIT STONE SET

Ref: 56247

Price: £3.10 (Including VAT at 17.5%)

51MM - 177MM CYLINDER HONE 280 GRIT STONE SET

Ref: 56248

Price: £7.12 (Including VAT at 17.5%)

51MM - 177MM CYLINDER HONE 180 GRIT STONE SET

Ref: 56249

Price: £7.12 (Including VAT at 17.5%)

51MM - 177MM CYLINDER HONE 120 GRIT STONE SET

Ref: 56250

Price: £7.12 (Including VAT at 17.5%)

230MM X 140MM MAGNETIC PARTS TRAY

Ref: 56332

For storage of nuts, bolts, screws, etc. whilst working. Tray has magnetic base for affixing to metal objects such as vehicle bodywork, tool boxes etc. Magnetism transfers to inner surface of tray to retain small metal parts, nuts, bolts, etc. Sold loose.
Price: £5.97 (Including VAT at 17.5%)

UNIVERSAL VALVE SPRING COMPRESSOR

Ref: 59085

Suitable for OHC and OHV petrol and diesel engines . Allows valve guide rubbers to be removed/replaced without the need to remove the head. Supplied complete with valve holder, quick-release air couplings and valve stem installer/remover. Packed in handy case with display sleeve.
Price: £65.19 (Including VAT at 17.5%)

DRAPER EXPERT 61 PIECE SOCKET AND SCREWDRIVER BIT SET

Ref: 59985

Expert Quality, comprises sockets, 10mm and 14mm insert bits. All are manufactured from the highest quality hardened and tempered steels. Packed in blow mould carrying case and display sleeve.
Price: £51.82 (Including VAT at 17.5%)

DRAPER EXPERT HIGH POWER MAGNETIC PICK-UP TOOL

Ref: 66198

Expert Quality, chrome plated flexible shaft with plastic handle. Will lift approximately 1.5kg. Display packed.
Price: £7.70 (Including VAT at 17.5%)

METRIC THREAD RESTORING FILE

Ref: 68703

For restoring and cleaning internal or external threads. Thread pitch: 080-100, 175-200, 125-150 and 250-300. Packed in clear plastic tube.
Price: £16.99 (Including VAT at 17.5%)

DRAPER EXPERT CORROSION ASSESSMENT TOOL

Ref: 69721

Expert Quality, combination tapping hammer, blunt scraper and short lever for checking corrosion levels in bodywork, panels and chassis. Suitable for use in MOT bays. Display packed.
Price: £6.78 (Including VAT at 17.5%)

DRAPER EXPERT 8MM T HANDLE SOCKET WRENCH

Ref: 72791

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £3.85 (Including VAT at 17.5%)

DRAPER EXPERT 10MM T HANDLE SOCKET WRENCH

Ref: 72792

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £3.95 (Including VAT at 17.5%)

DRAPER EXPERT 12MM T HANDLE SOCKET WRENCH

Ref: 72793

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £4.17 (Including VAT at 17.5%)

DRAPER EXPERT 13MM T HANDLE SOCKET WRENCH

Ref: 72794

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £4.24 (Including VAT at 17.5%)

DRAPER EXPERT 14MM T HANDLE SOCKET WRENCH

Ref: 72795

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £4.30 (Including VAT at 17.5%)

DRAPER EXPERT 17MM T HANDLE SOCKET WRENCH

Ref: 72796

Expert Quality, with sockets manufactured from chrome vanadium steel hardened and tempered with carbon steel PVC dipped handles. Display packed.
Price: £5.03 (Including VAT at 17.5%)

MAGNETIC PARTS TRAY

Ref: 72804

For storage of nuts, bolts, screws, etc. whilst working. Magnetism transfers to inner surface of bowl to retain small metal parts, nuts, bolts, etc. Display carton.
Price: £6.74 (Including VAT at 17.5%)

STAINLESS STEEL MAGNETIC PARTS TRAY

Ref: 72805

For storage of nuts, bolts, screws, etc. whilst working. Tray has magnetic base for affixing to metal objects such as vehicle bodywork, tool boxes etc. Magnetism transfers to inner surface of tray to retain small metal parts, nuts, bolts, etc. Display packed.
Price: £13.55 (Including VAT at 17.5%)

ROUND MAGNETIC PARTS TRAY ON CASTORS

Ref: 72812

Handy workshop tray with castors for retaining tools and small metal parts. Has fold down handles to assist picking up. Carton packed.
Price: £23.19 (Including VAT at 17.5%)


	DIY Tools and Professional Power Tools Catalogue